Follow Us:
Home > Servizi > Measurements, tests on site

Search

Newsletter

Subscribe to our newsletter to receive updates.

  • This field is for validation purposes and should be left unchanged.

Measurements, tests on site

Most of the tests and measurements can also be performed on site by highly qualified GBE staff. Thus the transformer can be verified also directly on the installation site. These are the tests that can be carried out on site:

Check integrity through visual inspection
Verify the proper operation protection accessories
Transformation ratio and polarity / vector group
Measurement of electrical resistances
Sound pressure in dB (A)
FRA – frequency response analysis – to verify the mechanical integrity of the core, windings, and the structure of the pressing system
Oil analysis to discriminate PCB, PCT in ppm with the emission following the removal of any gas chromatography

 

 

 

 

News

Supply of transformers to Algeria

  • 2 February 2018

PUMPING OIL plant built by a leading Italian company in the Oil and Gas industry¬†¬† GBE SpA has recently completed the supply of 4MVA oil transformers for a prestigious plant for the powering of twin-screw pumps for the Algerian state company. The contract was implemented in collaboration with a major Parma-based company operating in the […]

Continue

Hydromatters 4.0

  • 17 October 2017

Participation of GBE at the hydroelectric conference in Italy The prestigious annual conference entitled Hydromatters 4.0. recently took place in Padua. GBE SpA with the speaker Eng. Fabio Cavestro illustrated the constructive design used for transformers and reactors subject to occasional, continuous and severe mechanical vibration. During the seminar two types of installation were highlighted […]

Continue

Bunds for oil-filled Transformers

  • 10 July 2017

A flexible, easy-to-use solution designed by GBE Bunds for oil-filled transformers are a new product developed by the GBE steelworks department. For those installations where this bund has not been included, GBE has developed an extremely flexible solution, designed to protect the environment. The oil bund has been developed in pickled and subsequently galvanized metal […]

Continue
Copyright © 2014 GBE UK Limited Unit 9, The Courtyards, Victoria Road, Leeds LS14 2LB. GBE UK is a company registered in England and Wales with company number 08031046